Buy Turntable for IP Testing as per IEC 60529 – IEC/EN/ISO/IS 60529 Turntable For IPx1/2/3/4 Test
We are providing IP Testing Equipment’s to customers around the world. We offer standard and customized ingress protection IP testing equipment to meet your needs.
Turntable Introduction, Technical Details, and Specification:
To carry the specimens when determining the protection against water, according to IEC60529 figure 4, IEC 60335-1 clause 15.1.1, IEC60598 clause 9.2.4 and 9.2.5. IP X1 and X2 Vertical Rain Test Apparatus are to verify Protection against Vertically Falling Water Drops. It is designed and manufactured in accordance with the standard requirement of IEC60529 clause IPX1 and IPX2.
The rise and fall of the drip box are controlled by the motor. It is equipped with the rotatable objective table whose rotating speed is 1r/min for the IPX1 test. It is also equipped with 15 bevels for supporting samples for the IPX2 test. What’s more, this device is with a clean water filtration unit which can prevent pinhole from jamming.
The Waterproof Testing Machine oscillating spray tester is one of several methods used to test the water protection capabilities of enclosures for electronic items that are expected to be exposed to rain or water spray.
Turntable Equipment parameters |
||
|
Item No. |
LX-IPXC06A |
|
|
1 |
Diameter |
600 mm |
|
2 |
Load Bearing |
Maximum 100KG |
|
3 |
Speed |
1 r/min |
|
4 |
Tilting angle |
0° or 15°Adjustable |
|
5 |
Lift range |
Fixed type |
|
6 |
According to |
IEC60529:1989+A1:1999 (IPX1, IPX2) |
Features of IP Testing Turntable:
- Turntable motor selection DC motor, safe and reliable.
- Mesa with 304 stainless steel pipe welding forming, long time use is not rusty, convenient fixed sample.
- Motor parts are all sealed with stainless steel plate to prevent leakage.
- Touch screen controller
- Oscillating tubes are stainless steel
- Stainless steel nozzles removable for cleaning or replacing
- Nozzles can be turned on or off to adjust the arc of the spray from the tube
- The water supply unit includes a water filter, pump, flow meter, electromagnetic valve, and switch valve.
- Two available flow rates to meet major standards
- Oscillating tube angle can be adjusted freely from 40 ° to almost 360 °
- Stainless steel specimen support with easy height adjustment and two specimen bases
Technical Parameter of IP Testing Turntable:
|
Power supply |
220V 50Hz or 110V 60Hz |
|
Control system |
PLC control, the touch screen operation |
|
Tube angle |
20° to almost 180° of both sides of vertical (adjustable) |
|
Nozzle |
0.4mm(0.8mm nozzle as an option) |
|
Water Pressure |
80~100kPa |
|
Specimen Support Diameter |
700mm |
|
Specimen support Height |
855-1300mm (adjustable) |
|
Specimen Support Max Loading |
100kg |
|
Flow speed |
0.4mm nozzle: 0.07l/ min. ±5%, 0.8mm nozzle: 0.6l/min. ±5% |
|
Timer |
1-999 minutes, auto stop |
|
Weight |
150kg |
|
Oscillation Tube Radius |
0.2m/0.4m/0.6m/0.8m/1m/1.2m/1.4m/1.6m or can be customized |
Quick Details of IP Testing Turntable
- Power: Electronic
- Standards: IEC60529/IEC60598-1/IEC 60335-1/IEN60335-1/IEC60950-1
- Materials: stainless steel
- Turntable diameter: 600mm
- Turntable height: 855-1300mm (adjustable) (adjustable)
- Turntable Max Loading:100KG
- Water Pressure:80~100kPa
- Turntable Wheels: 4 height adjustable and lockable
Ip testing Turntable Specification
|
Type Of Testing Machines |
Ingress Protection |
|
Size |
500 X 500 mm (Turntable) |
|
Surface Finishing |
Polished |
|
Drop of Rain Area |
1000X1000mm ( Can customize 600X600,1200X1200,1600X1600mm,As per requirement tank size) |
|
Equipment Outer Dimensions |
1250X1250X2000mm ( LXDXH ) |
|
Material |
S.S. 304 |
|
Dripping Aperture |
0.4mm. |
|
The Distance Between holes |
20×20 mm |
|
Rainfall |
1-5mm/Min(+/-0.5mm/min) |
|
Turntable Bearing |
60KG |
|
Turntable Speed |
1 r/min |
|
Turntable Adjustable Incline |
0 Degree or 15 Degree |
|
Turntable Lifting Range |
400 mm |
|
Testing Time |
0-999 min |
|
Protective Device |
Leakage, water shortage, short circuit |
|
Voltage |
380V |
|
Power |
3kW |
|
Standard |
EN/ISO/IS/ IEC – 60529,EN 60529 |
IEC60529 IP Waterproof Turntable/Waterproof Testing
This test is used to meet the requirements of IPX3 and IPX4 in IEC 60529. In the test described in IPX3 and IPX4 with an oscillating tube, the specimen is placed in the center point of the semicircle defined by the oscillating tube. It is then subjected to a spray of water at a defined pressure to test for leakage. The oscillating tube will have spray holes over 120 ° of the tube for IPX3 and over the full 180 ° For IPX4. In IPX3 the tube will oscillate to 60 ° on either side of the vertical. For IPX4 the tube travels through an angle of almost 360 ° the specimen needs to be placed within 200mm of the tube. For this reason, different size tubes are needed to test different size specimens
Here you can see and Buy a List of equipment in compliance with IEC 60529,
- Dust Chamber 3 M3 5x, 6x
- Dust Chamber 800x800x900 Mm 5x, 6x
- Dynamometer 50n 1x, 2x
- Jointed Test Finger (Iec 61032, F. 2, Test Probe B) 2x, B
- Water Distiller (8l/h)
- Water Distiller (20l/h)
- Water Supply Unit For Drip Box X1, X2
- Turntable For Drip Box X1
- Tube For Spray Apparatus, R 200, 60, 90° X3, X4
- Tube For Spray Apparatus, R 400, 60, 90° X3, X4
- Tube For Spray Apparatus R 600 60,90° X3, X4
- Tube For Spray Apparatus, R 800, 60, 90° X3, X4
- Tube For Spray Apparatus, R 1000, 60, 90° X3, X4
- Drip Box 700 X 700 Mm X1, X2
- Drip Box 500 X 500 Mm X1, X2
- Drip Box 500 X 1000 Mm X1, X2
- Motor Drive For Spray Apparatus X3, X4
- Telescope Support 270×180 X4
- Spray Nozzle X3, X4
- Wall Electrolift For Drip Box X1, X2
- Water Jet Hose Nozzle Dia. 6,3 Mm X5
- Water Jet Hose Nozzle Dia. 12,5 Mm X6
- Jet Test Set X5, X6, X7, X8
- Tilted Support For Ipx2 Test 500 X 500 X2
- Rigid Steel Wire Dia. 1 With Handle & Stop Sphere (IEC 61032 – Test Probe D) 4-6x,d
- Rigid Steel Rod Dia. 2,5 With Handle & Stop Sphere (IEC 61032 – Test Probe C) 3x, C
- Rigid Sphere Dia. 12.5 2x
- Rigid Test Sphere With Guard Dia. 50 1x, A